MICROFILTRATION

Reusable PTFE Joint Sleeves feature a unique manufacturing process that permits superior quality PTFE joint sleeves at unbelievably low prices. Elongated cones of micro-thin virgin PTFE film tapered to fit snugly around glass joints. Approximately 0.05...

Foxx Life Sciences™ EZBio® Vent Filters are used for hydrophobic venting and solvent filtration applications. The PTFE filter membrane is ideal for maintaining purified water stored in carboys, or for sterile venting during a slow...

For determining moisture loss on drying in tablets, troches, or capsules. • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirementsImage(s) are representative of the...

This tapered concentrator tube is for use with Kuderna-Danish and other concentrators.• May be detached from the complete assembly and stoppered for analysis or storage• Secure to assembly with springs or 675300 polyacetal clamps, not...

Designed to address the experiments detailed in the Williamson text, Macroscale and Microscale Organic Experiments, published by D.C. Heath and Company, Lexington, Massachusetts. Smaller quantities afford a greater degree of safety, improve air quality...

47 mm, 100 mL Glass Funnel. Accessory for 47 mm ULTRA-WARE® Microfiltration Assemblies (Cat. No. 985-47035, 985-47110, 985-47134, 985-47158, 985-47176, and 985-47185).Image(s) are representative of the product group and not necessarily the...

The 25 mm vacuum microfiltration assembly is designed to handle small volumes of liquids for analysis of particulate or microbiological contamination. It has a fritted glass support and is used for general filtration.• Supplied with a 40-60 micron...

The 25 mm vacuum microfiltration assembly is designed to handle small volumes of liquids for analysis of particulate or microbiological contamination. It has a stainless steel support and is used for filtering viscous or proteinaceous solutions or to...

The 47 mm filtration apparatus with fritted glass support is recommended for routine filtration analysis of corrosive liquids and the removal of particulates from HPLC solvents. • The ground joint connection eliminates the phthalate contamination...

This all glass microfiltration system eliminates pouring HPLC solvents into funnels. • The solvent pickup adapter draws solvent directly from a reagent bottle through a 47 mm filter and into a filter flask• After filtration is complete, the...

This 47 mm vacuum microfiltration assembly is used for general filtration and is designed to handle up to 500 mL of sample liquids for the analysis of particulate or microbiological contamination. • Supplied with a 40-60 micron porosity fritted...

This filtration assembly is designed to collect filtrate directly into a media-style bottle. • Supplied with funnel, clamp, fritted glass support base, tubing adapter, PBT cap, sealing ring and vacuum/pressure bottle• Support base connects...

This 47 mm vacuum microfiltration assembly is used for autoclaving with the filter in place and is designed to handle up to 500 mL of sample liquids for the analysis of particulate or microbiological contamination. • Supplied with a 40-60 micron...

This 47 mm vacuum microfiltration assembly is designed to handle up to 500 mL of sample liquids for the analysis of particulate or microbiological contamination. It has a stainless steel support and is used for filtering viscous or proteinaceous...

This filtration assembly is designed to collect filtrate directly into a media-style bottle. It has a stainless steel support and is recommended for filtering viscous or proteinaceous solutions or to produce ultra-clean filtrate.• Supplied with...

The 47 mm filtration apparatus with stainless steel support is recommended when filtering viscous or proteinaceous solutions to give the maximum flow rate. • This apparatus is also used to produce ultra-clean filtrate since the stainless steel...

The 90 mm filtration assembly with fritted glass support is designed for large volume filtration analysis of corrosive liquids or samples with high particulate loads that would tend to clog a 47 mm diameter filter. This unit is also recommended for...

The 90 mm filtration apparatus with replaceable fritted glass support is recommended for large volume filtration analysis of corrosive liquids or samples with high particulate loads. • The glass support disc can be replaced if it becomes clogged or...

The 90 mm vacuum microfiltration assemblies are designed for large sample volumes or samples with high particulate loads that would tend to clog a 47 mm diameter filter. The assembly with fritted glass support is used for general filtration.•...

The 90 mm vacuum microfiltration assemblies are designed for large sample volumes or samples with high particulate loads that would tend to clog a 47 mm diameter filter. The assembly with replaceable fritted glass support is used for general filtration...

The 90 mm vacuum microfiltration assemblies are designed for large sample volumes or samples with high particulate loads that would tend to clog a 47 mm diameter filter. This assembly with stainless steel support is used for filtering viscous or...

The 90 mm filtration apparatus with stainless steel support is recommended when filtering large volumes of viscous or proteinaceous solutions to give the maximum flow rate. • This unit is also used to produce ultra clean filtrate since the screen...

Glass Flask Cap with 40/35 outer joint. Accessory for 90 mm ULTRA-WARE® Microfiltration Assemblies with Ground Joints (Cat. No. 985-47188, 985-47137, 985-47161, 985-47179, 985-47167, and 985-47170) and 47 mm ULTRA-WARE® Microfiltration...

Alternative sized glass funnels for 25 mm ULTRA-WARE® Microfiltration Assemblies (Cat. No. 985-46984 and 985-47011).Image(s) are representative of the product group and not necessarily the individual product.Capacity (mL): 150Capacity (mL): 300

Accessory Glass Funnels for 47 mm ULTRA-WARE® Microfiltration Assemblies (Cat. No. 985-47014, 985-47098, 985-47035, 985-47110, 985-47134, 985-47158, 985-47176, and 985-47185)Image(s) are representative of the product group and not necessarily the...

No. 12 white silicone rubber stopper with 9/16 in. hole. Accessory for 90 mm ULTRA-WARE® Microfiltration Assemblies (Cat. No. 985-47038, 985-47071, and 985-47113).Image(s) are representative of the product group and not necessarily the individual...

PTFE Sleeves for greaseless connections to ground joints. Fits Standard Taper Joint 40/35. Accessory for 90 mm ULTRA-WARE® Microfiltration Assemblies with Ground Joints (Cat. No. 985-47188, 985-47137, 985-47161, 985-47179, 985-47167, and 985-47170)...

Replacement 15 mL Glass Funnel for 25 mm ULTRA-WARE® Microfiltration Assemblies (Cat. No. 985-46984 and 985-47011).Image(s) are representative of the product group and not necessarily the individual product.

29 mm PTFE / Silicone Sealing Ring. Replacement part for Adapter Assembly with GL45 Thread (Cat. No. 985-12973).Image(s) are representative of the product group and not necessarily the individual product.

47 mm, 300 mL Glass Funnel, graduated from 100 to 250 mL in 25 mL intervals. Replacement part for 47 mm ULTRA-WARE® Microfiltration Assemblies (Cat. No. 985-47014, 985-47098, 985-47035, 985-47110, 985-471434, 985-47158, 985-47176, and...

42 mm PTFE / Silicone Sealing Ring. Replacement part for 47 mm ULTRA-WARE® Microfiltration Assemblies with GL45 Style Bottle (Cat. No. 985-47014 and 985-47098) and Adapter Assembly with GL45 Thread (Cat. No. 985-12973).Image(s) are representative of...

Replacement 90 mm Glass Base with 40/35 outer joint for 90 mm ULTRA-WARE Microfiltration Assemblies with Ground Joint (Cat. No. 985-47188, 985-47167, and 985-47170).Image(s) are representative of the product group and not necessarily the individual...

47 mm Anodized Aluminum Clamp. Replacement part for 47 mm ULTRA-WARE® Microfiltration Assemblies (Cat. No. 985-47035, 985-47089, and 985-47110, 985-47014, 985-47098, 985-47128, 985-47131, 985-47134, 985-47158, 985-47176, and 985-47185)Image(s) are...

90 mm Anodized Aluminum Clamp. Replacement part for 90 mm ULTRA-WARE® Microfiltration Assemblies (Cat. No. 985-47038, 985-47071, and 985-47113) and 90 mm ULTRA-WARE® Microfiltration Assemblies with Ground Joints (Cat. No. 985-47188, 985-47137,...

Replacement Anodized Aluminum Clamp for 25 mm ULTRA-WARE® Microfiltration Assemblies (Cat. No. 985-46984 and 985-47011).Image(s) are representative of the product group and not necessarily the individual product.

Filtration Adapter Assembly Body Only, made from 33 expansion borosilicate glass. Replacement part for Adapter Assembly with GL45 Thread (Cat. No. 985-12973).Image(s) are representative of the product group and not necessarily the individual product.

Replacement flasks for 90 mm ULTRA-WARE® Microfiltration Assemblies with Ground Joints (Cat. No. 985-47188, 985-47137, 985-47161, 985-47179, 985-47167, and 985-47170) and 47 mm ULTRA-WARE® Microfiltration Assemblies with Ground Joint (Cat. No...

90 mm Fritted Glass Support Base. Replacement part for 90 mm ULTRA-WARE® Microfiltration Assembly with Fritted Glass Support (Cat. No. 985-47038) and 90 mm ULTRA-WARE® Microfiltration Assemblies with Replaceable Frit and Ground Joint (Cat. No...

Replacement Fritted Glass Support Base for 25 mm ULTRA-WARE® Microfiltration Assembly with Fritted Glass Support (Cat. No. 985-46984).Image(s) are representative of the product group and not necessarily the individual product.

47 mm Fritted Glass Support Base with 40/35 outer joint. Replacement part for 47 mm ULTRA-WARE Microfiltration Assemblies with Solvent Pick-Up Adapter and Ground Joint (Cat. No. 985-47128 and 985-47131) and 47 mm ULTRA-WARE® Microfiltration...