CULTURE CHAMBERS

Celltreat Chambered Cell Culture Slides grow cells directly on the slide without any need for future transfer which is ideal for growing and viewing cells under a microscope on a standard 25 x 75 mm slide. The feature an integrated gasket to prevent...

• 45 mm polypropylene cap• Two 15.24 cm stainless steel tubes• Autoclavable• Fits Corning glass and plastic vessels with GL45 mm threads• Accessory for E-Cube System (Cat. No. 3286)Image(s) are representative of the product...

• 33 mm threaded cap• Has 1/8 in. (3.2 mm) I.D. tubing and a female luer 1/8 in. (3.2 mm) hose barb with a male luer lock plug• Chemically resistant, heat sealable flexible tubing• Sterilized by gamma irradiation Image(s) are...

• 33 mm threaded cap• Has 3/8 in. (9.5 mm) I.D. Tubing and a 5/16 in. (7.94 mm) I.D. Barbed Fitting• Chemically resistant, heat sealable flexible tubing• Sterilized by gamma irradiation Image(s) are representative of the product...

• 33 mm threaded cap• Vented cap has 50 mm diameter filter with 0.2 µm pore nonwettable (hydrophobic) polyvinylidene difluoride (PVDF) membrane• Allows gas exchange while minimizing the risk of contamination• Filter connected...

The Corning CellCube system provides a fast, simple, and compact method for the mass culture of attachment-dependent cells. It uses a tissue culture-treated growth surface for cell attachment, and continually perfuses the cells with fresh medium for...

Sterile Polystyrene CellSTACK Cell Culture Chambers treated with a Corning CellBIND surface treatment for enhanced cell attachment. Two 26 mm diameter filling ports allow direct access to chamber bottom providing greater flexibility for sterile filling...

A stacking device models the top surface of the CellSTACK® chamber, securely nesting in the strengthening ribs. It is used to optimize incubator space while providing clearance for ventingImage(s) are representative of the product group and not...

CellSTACK Sterile Tissue Culture Treated Polystyrene Culture Chambers with 2 Vent Caps. Two 26 mm filling ports allow direct access to chamber bottom providing greater flexibility for sterile filling and emptying by pouring, pipetting or via tubing in a...

This sterile polystyrene CellSTACK has a 636 cm2 cell growth area. Ultra Low Attachment surface features a covalently bound hydrogel layer that effectively inhibits cellular attachment and minimizes protein absorption, enzyme activation, and cellular...

This CellSTACK culture chamber features a 1,272 cm2 cell growth area. Two 26 mm diameter filling ports allowing direct access to chamber bottom. The chamber provides greater flexibility for sterile filling and emptying by pouring. 33 mm polyethylene...

• Chemically resistant, heat sealable flexible tubing • Accommodates both 2L and 4L bottles (not included)• Male MPC connector with cap • PureFit® tube clamp system • Autoclavable• 0.2 µm PTFE filter vent ...

The E-Cube system provides a simple proof of concept to determine if your cells will grow well in the Corning CellCube module† prior to investing in the resources and funding that would be necessary for the larger, more automated CellCube system...

E-Cube™ Fittings Kit contains:• 3/16 inch Norprene™ Pump tubing (18 inches)• Tubing ratchet clamps (6 ea)• Barbed T-fittings (2 ea)• Barbed Reducing Connector (1 ea) • 4 inch Wire ties (20 ea)• Barbed...

The next generation in Cornings High Yield PERformance (HYPER) Platform - the HYPERStack Cell Culture Vessel. This new product line combines the best of two Corning products; the CellSTACK Culture Chamber and HYPERFlask vessel. The utilization of the...

Corning microcarriers are designed to simplify your scale-up processes. The microcarriers are sterile, ready-to-use, and available in closed systems packaging to be used directly with bioreactors. Additionally, the microcarriers are surface-treated to...

33 mm polyethylene filling cap, not vented.Image(s) are representative of the product group and not necessarily the individual product.

• Designed to fit pre-existing filling systems or other product brands• 33 mm polyethylene threaded cap• Vented overcap has 0.2 µm PTFE membrane sealed into the peelable foil cover• Sterilized by gamma irradiation•...

• 33 mm threaded cap • Vented cap has 0.2µm pore nonwettable (hydrophobic) membrane sealed directly to the cap• Allows gas exchange while minimizing the risk of contamination• Sterilized by gamma irradiationImage(s) are...

• Accessories Cell FactoriesImage(s) are representative of the product group and not necessarily the individual product.

Save valuable space with Thermo Scientific™ Nunc™ EasyFill™ Cell Factory system. Each 10-layer, single-use system holds the equivalent of 36 T175 flasks. The linear multi-layer cell culture format is easy to use and promotes easy...

Sterilized system consists of a removable, polystyrene media chamber sealed to a 25 x 75 mm soda lime glass slide using biocompatible acrylic adhesive. The glass slide has a chemically modified surface that provides consistent adhesion and...

System features removable, polystyrene chambers that are sealed to a 25 x 75 x 1.2 mm non-fluorescent glass slide using biocompatible acrylic adhesive. The sealant remains with the media chamber after detachment, leaving a hydrophobic border to define...

Systems feature a removable polystyrene medium chamber so cells can be grown, fixed and stained on the same slide. A convenient writing surface is easily marked, providing positive sample identification. Useful for viral and mycoplasma testing,...

Cell culture vessel is mounted onto a borosilicate coverglass that is thin to allow examination using inverted microscope systems at high magnification levels. The polystyrene upper structure is attached to the glass with a non-toxic medical grade...

Cover glass for Catalog No. 757-10780, 16 well Chamber Slide. Size: 22 x 74 mm.Image(s) are representative of the product group and not necessarily the individual product.

• For industrial scale production of for example vaccines, monoclonal antibodies or pharmaceuticals• The patented Gas-flow system secures a controlled atmosphere in the culture trays by equal distribution of user-specified gas mix actively...

• For industrial scale production of for example vaccines, monoclonal antibodies or pharmaceuticals• Ideal for adherent cells• Can be used for suspension culture• Growth kinetics unaltered from laboratory scale culture•...

Kit consists of : HDPE connector, two Tyvek cover caps, two blue sealing caps, Pall Gelman 4210 bacterial air vent filter, tubing and clamp.Image(s) are representative of the product group and not necessarily the individual product.