SPINNER FLASKS

Cap assembly for small biorecator with various fitting arrangements. For use with Proculture® Spinner Flasks.Image(s) are representative of the product group and not necessarily the individual product.Fittings: 2 x 12 mm, 2 x 1/4 in., 1 x 3/8 in...

High torque, low rpm stirrer motor specifically designed to maintain constant low speed for use on top of Proculture® Spinner Flasks. The gearhead stirrer delivers 14.5 in-lbs of torque and has a maximum speed of 350 rpm. The weight of the motor is...

Center Cap Assemblies for Proculture® Spinner Flasks are designed for use with direct overhead drive motors (Cat. No. 278-10020 or 278-10023). These cap assemblies require optional 8L (Cat. No. 988-20054) , 15L (Cat. No. 988-22042), or 36L (Cat. No...

Sidearm fittings for insertion probes are used to secure pH, O2, or temperature sensors in larger spinner flasks with vertical sidearms during cell culture to monitor important cell culture parameters. Together with gassing and media handling fittings...

Sidearm fittings for gas handling can be used to provide gases into larger Spinner Flasks with vertical sidearms during cell culture to enhance the productivity of the cell culture. Together with sensor probe fittings and media handling fittings, they...

Sidearm fittings are used for a variety of functions in angled sidearm spinner flasks during cell culture. Combination angled sidearm fittings provide a convenient way of transferring media into or out of flasks aseptically. They can also be used to...

Sidearm fittings are used for a variety of functions in angled sidearm spinner flasks during cell culture. Dual angled sidearm fittings provide a convenient way of aseptically transferring media into or out of flasks. They can also be used to sparge the...

Stainless steel impeller shaft with dual bearing, modified impeller assembly for use in magnetically driven, Proculture® Spinner Flasks. Narrower impeller paddle design allows use with probes to create a small bioreactor.Image(s) are representative...

Sidearm fittings for media handling can be used to introduce medium aseptically into larger Spinner Flasks with vertical sidearms during cell culture to enhance the productivity of the cell culture. Together with sensor probe fittings and gas handling...

Direct drive paddle assemblies for use with direct drive overhead motors on series 4510 and 4512, Proculture® Spinner Flasks. The paddle assemblies can be used with either 100 mm or 120 mm direct drive center cap assemblies (sold separately,...

• Flask only, caps, paddles, and accessories available separately• Can be used with direct drive motor or magnetically driven paddle assembly• Side baffles enhance aeration and agitation of flask contents• Patented stretch...

• Flask only, caps, paddles, and accessories available separately• Can be used with direct drive motor or magnetically driven paddle assembly• Side baffles enhance aeration and agitation of flask contents• Patented stretch...

• 120 mm center neck with flat cap and 45 mm sidearm neck diameters• Side baffles enhance aeration and agitation of flask contents• Patented stretch impeller design ensures optimal stirring• Sidearm designs permit easy access of...

• Side baffles enhance aeration and agitation of flask contents• Patented stretch impeller design ensures optimal stirring• Sidearm designs permit easy access of 25 and 50 mL pipets• Vessels are borosilicate glass and other parts...

Dir Overhead Drive 120mm Center Cap Assem, 8L and 15L Proculture Spinner Flasks, 2-1/8 Tubing, 2-12mm Probe Insertion FittingImage(s) are representative of the product group and not necessarily the individual product.

The spinner flask body is constructed of polystyrene, paddle and shaft from polypropylene and caps from high density polyethylene. All are made of USP Class VI and ISO 10993-18 compliant materials. Recommended working range of 1L to 3L. Extended paddle...

These disposable high density polyethylene sterile vent caps contain a 0.2m pore hydrophobic PTFE membrane. They are designed to fit the Corning® 500 mL, 1L and 3L Disposable Spinner Flasks for culture applications requiring increased gas exchange...

The Corning® disposable spinner flask system comes ready-to-use with paddle and integrated magnet, eliminating the need for time-consuming assembly or cleaning and reassembly. Molded from virgin polystyrene and gamma-irradiated, each spinner flask...

Specially designed for efficient top-to-bottom mixing at low speed and low shear. This lightweight, break-resistant 1 L culture vessel is excellent for use on a magnetic stir plate for small-volume scale-up applications. This autoclavable vessel is...

Gain easy access to your suspension cultures with four-port, Thermo Scientific™ Nalgene™ Polycarbonate Culture Vessels with Ports. Economical, lightweight and break-resistant, it is molded of transparent polycarbonate for easy viewing of your...

Provides maximum surface interface between culture and flask atmosphere. Adjustable paddle blade impeller for greater turbulence that does not protrude through the top cap. Bottom dimple on flasks 125 ml and larger prevents the crushing of cells beneath...

The Wheaton Celstir double sidearm spinner flask features an adjustable paddle blade impeller for better mixing. It provides maximum surface interface between culture and flask atmosphere. Proportioned to provide 1:1 headspace for good gas exchange. The...

The Wheaton Celstir double sidearm spinner flask is fully jacketed which allows precise temperature control of its contents when operated with a recirculating water bath. It has PTFE faced rubber-lined caps on the sidearms. The hose connectors accept...

Features four 45 mm sidearms with PTFE-lined caps. 100-400 screw top size.Image(s) are representative of the product group and not necessarily the individual product.Volume (ml): 1000Dim. Dia x H (mm): 130 x 250Volume (ml): 3000Dim. Dia x H (mm): 178 x...

Double sidearm Celstir complete with water jacket allows for precise temperature control of Celstir contents when operated with a recirculating water bath. PTFE-lined caps. Hose connectors accept 1/4 in. tubing.Image(s) are representative of the product...

Replacement for Magna Flex™ Spinner Flasks. This unit includes a top cap with liners, glass stirring ball and connecting silicone tubing. This glass impeller assembly is designed for replacement on all Magna Flex™ style flasks.Image(s) are...

Replacement for Double Sidearm Celstir and Jacketed Double Sidearm Celstir. This unit includes a top cap with liners, glass rod, magnet holder, magnet and stirring paddle.Image(s) are representative of the product group and not necessarily the individual...

Replacement for Double Sidearm Celstir and Jacketed Double Sidearm Celstir. This non-breakable stainless steel shaft, for replacing the glass shaft included with Celstir flasks, may be retrofitted to the existing Celstir flasks.Image(s) are...