FREEZE DRYERS

Drying Chambers provide a means to attach flasks to your freeze dry system or contain samples in bulk. The 12-Port Drying Chamber includes 12 neoprene valves that accommodate both 1/2 in. and 3/4 in. adapters for connection of flasks. It is compatible...

The 12-Port Drying Chamber with PTFE is made of type 304 stainless steel with a corrosion-resistant PTFE-coated interior. Includes 12 neoprene valves with plastic knobs that accommodate both 1/2 in. and 3/4 in. adapters for connection of flasks, an...

Manifold with 14 neoprene valves with plastic knobs that accommodate both 1/2 in. and 3/4 in. adapters for connection of flask. Includes one latching pin. For use with FreeZone Console Freeze Dryers only. Manifolds are made of type 304 stainess steel and...

Drying Chambers provide a means to attach flasks to your freeze dry system or contain samples in bulk. The 16-Port Drying Chamber includes 16 neoprene valves that accommodate both 1/2 in. and 3/4 in. adapters for connection of flasks. It is compatible...

Manifold includes 20 neoprene valves with molded plastic knobs that accommodate both 1/2 in. and 3/4 in. adapters for connection of flasks. Manifolds are made of type 304 stainless steel and mount atop FreeZone Freeze Dry Systems. Compatible with...

Manifold with 28 neoprene valves with plastic knobs that accommodate both 1/2 in. and 3/4 in. adapters for connection of flask. Includes one latching pin. For use with FreeZone Console Freeze Dryers only. Manifolds are made of type 304 stainless steel...

Allows connection of 29/32 round bottom flasks to valve ports on drying chambers and manifolds. Image(s) are representative of the product group and not necessarily the individual product.

Provide connection of ampules to drying chambers and manifolds. Permits attachment of three ampules to a single valve port. Ampules are attached using Ampule Valve Adapters or 1/8 in. surgical tubing (not provided). Cavity in adapter body can be filled...

Manifold includes four neoprene valves with molded plastic knobs that accommodate both 1/2 and 3/4 in. adapters for connection of flasks. Manifolds are made of type 304 stainless steel and mount atop FreeZone Freeze Dry Systems. Image(s) are...

6-Port Tray Dryer Manifold. Six valves provide the flexibility to connect flasks and other freeze dry glassware to the Freeze Dry System with Stoppering or Bulk Tray Dryer. Valves accommodate either 1//2 in. or 3//4 in. flask adapters. Mounts to support...

Manifold with eight neoprene valves with plastic knobs that accommodate both 1/2 in. and 3/4 in. adapters for connection of flask. Includes one latching pin. Manifolds are made of type 304 stainess steel and mount atop FreeZone Freeze Dry Systems...

14 in. diameter acrylic lid has a 3 in. diameter hole for direct accessory connection. Includes neoprene gasket. Lid is compatible with FreeZone Drying Chambers, 4- & 8-Port Manifolds, Clear Chambers, and Heated Product Shelves. For use with FreeZone...

For connecting the Fast-Freeze Flasks to the valve ports on your drying chamber or manifold. Choose borosilicate glass or stainless steel. 1/2 and 3/4 in. diameters.Image(s) are representative of the product group and not necessarily the individual...

Adapters are required to attach Lyph-Lock Flasks to freeze dry valve ports. Manufactured from borosilicate glass.Image(s) are representative of the product group and not necessarily the individual product.Standard Taper Joint: 19/38For Valve Size (in.):...

Fast-Freeze Flasks attach with adapters to valve ports on Labconco Drying Chambers and Manifolds. Amber-colored glass bottoms only. Fast-Freeze Flasks are compatible with any brand freeze dryer that has 1/2 in. or 3/4 in. diameter valve ports. Tops,...

These Ampule Pods provide connection of ampules to drying chambers and manifolds. Pods attach to a single valve port and accommodate up to 15 ampules for simultaneous freeze drying. Polypropylene base has 15 tubing ports, each with silicone tubing for...

Provide connection of ampules to drying chambers and manifolds. Connect ampules to valve ports or stainless steel stems. Ten per package.Image(s) are representative of the product group and not necessarily the individual product.

Labconco Ampules are fabricated of highest quality borosilicate glass for strength and durability. Ampules are sold in packages of 100.Image(s) are representative of the product group and not necessarily the individual product.Pre-Scored Flat Bottom...

Lid replaces the lid to the built-in drying chamber on FreeZone 4.5 Liter Freeze Dry Systems to permit use of the Heated Drying Chamber (Cat. No. 336-21913), 4-Port Manifold (Cat. No. 346-28361), 20-Port Manifold (Cat. No. 346-17191), or Clear Chamber...

Bleed Valve bleeds manually when using the Cold Trap with other laboratory equipment. Applicable Products: CentriVap Cold Traps, Dry Ice Benchtop Freeze Dry System (Cat. No. 346-17200).Image(s) are representative of the product group and not necessarily...

A complete Fast-Freeze Flask consists of one silicone rubber top, glass bottom and a supply of filter paper. High strength borosilicate glass withstands extreme temperatures and high vacuum. Amber-colored glass protects light-sensitive samples. Flask...

Digital Electronic Vacuum Gauges provide an LCD display of vacuum measurement in mBar, PA or Torr. Range is 0.02 mBar to 5 mBar. Stainless steel casing. Includes a cord with 3/8 in. to 1/2 in. O.D. adapter for connection to either vacuum tubing or a...

For processing samples with low eutectic points. Trap connects in series with a freeze dry system or vacuum evaporation system and vacuum pump to prevent contaminants from migrating into the vacuum pump. An insulated well, when dry ice and solvent are...

Fabricated from the highest quality borosilicate glass for strength and durability. Fast-Freeze flasks connect easily to the systems drying chamber, to ensure leak-free vacuum seals without springs, hooks or grease. Serum bottles and ampules are...

Help to prevent sample melt back. They allow a small Fast-Freeze Bottom containing the sample to be placed inside a larger Fast-Freeze Flask so that the vacuum surrounding the sample insulates it from the room atmosphere. Stainless steel. Flasks not...

FreeZone Benchtop Shell Freezers provide a compact system for pre-freezing samples for lyophilization. The stainless steel bath has two rollers that rotate Fast-Freeze Flasks in a low temperature heat transfer solution, such as methanol or ethanol, so...

Powder-coated steel cart supports FreeZone benchtop and Triad Freeze Dryers during use, storage, or transportation. Lower shelf provides space for vacuum pump. Casters provide mobility. Maximum weight capacity of 450 lbs.Image(s) are representative of...

Support Shelves attach easily without tools to the sides of the FreeZone 1, 2.5 or 4.5 Liter Freeze Dry System or on the left-hand side of the FreeZone Triad System cabinet to provide support for large flasks attached to the drying chamber or manifold...

Replacement lids fit on drying chambers and FreeZone collector chambers. The 9.25 in. glass lid replaces the acrylic lid on the 12-Port Drying Chamber 7522800 to provide additional protection from solvents and corrosives that attack acrylic, such as...

Glassware kit for FreeZone Freeze Dryers. Kit Includes:• One 600 mL complete Fast-Freeze Flask (Spectrum Cat. No. 336-21979)• One 300 mL complete Fast-Freeze Flask (Spectrum Cat. No. 336-21976)• One 3/4 in. stainless steel straight...

Heated drying chamber, type 304 stainless steel, complete with a three shelf heater with 43°C (110°F) high limit thermostat and 24V transformer. Chamber includes 1/2 in. thick, clear acrylic cover, gaskets and electrical pass-through for...

Heated Shelf with Sensor, for use with Bulk Tray Dryer. 200-watt heater ensures efficient heating from -20 to 60°C. A microprocessor in the Bulk Tray Dryer maintains system temperature within 3°C of set point. FreeZone Bulk Tray Dryers (Cat. No...

Isolation Valve, isolates the Labconco Stoppering Tray or Bulk Tray Dryer from the Freeze Dry System to shorten time necessary to reestablish working vacuum levels and to provide a means for checking end point. Consists of a valve handle, clamps and...

Replacement lids fit on drying chambers and FreeZone collector chambers. Glass lid replaces the acrylic lid included with FreeZone 6, 12 & 18 Liter Freeze Dry Systems and with 16-Port Drying Chambers. Provides additional protection from solvents and...

For processing samples with ultra low eutectic points. Secondary Trap connects in series with a freeze dry system and vacuum pump to prevent contaminants from migrating into the vacuum pump. After pulling a vacuum, liquid nitrogen may be introduced via...

Flask bottom is made of borosilicate glass to withstand extreme temperatures and high vacuum.Image(s) are representative of the product group and not necessarily the individual product.Flask Bottom Capacity (mL): 25Flask Bottom Height (mm): 37Flask...

Flexible silicone rubber seal grasps the top and bottom of the Lyph-Lock flask. The ring holds securely together during pre-freezing and lyophilization.Image(s) are representative of the product group and not necessarily the individual product.For Flask...

Flask Tops are made of high strength borosilicate glass to withstand extreme temperatures and high vacuum.Image(s) are representative of the product group and not necessarily the individual product.19/38 STJFits Flask Sizes (mL): 100 and 25019/38 STJFits...

A complete Lyph-Lock Flask includes a glass top and bottom and a rubber ring. Flasks should be filled no more than one-third of their volume so that maximum surface area is achieved and efficient lyophilization is assured. Adapters are required to attach...

Anodized aluminum block with 12 bore holes that accommodate 1.7 mL microcentrifuge tubes. Holder may be placed on any flat freeze drying surface such as inside Clear Chambers, Heated Drying Chambers or the built-in vacuum drying chamber of FreeZone...