CULTURE FLASKS

• 182 cm2 Deep Volume Flask (weekend flask) has extra depth which allows for more media volume• You can leave cell culture to grow for longer without drying out (maintain cell cultures over the weekend) • Tissue Culture Treated Flasks...

• Uniform hydrophilic surface ideal for consistent cell attachment• Stable base enables filling with flask standing upright• Convenient zip-closure bag is a practical alternative to folding and taping opened bags• Vent caps...

• Non-Treat Suspension Flasks available in five sizes: 25, 50, 250, 600 and 850 mL• Suspension culture flasks are not tissue culture treated• Hydrophobic surface does not facilitate cell attachment• Provided with 0.22 m...

Corning® rectangular flasks have a ramp from the bottom to the canted neck for easier pouring and pipet access. Most canted neck flasks also have an anti-tip skirt to enhance stability. Canted neck flasks allow easier pouring and improved access to...

Corning CellBIND cell culture surface may eliminate the need to use poly-D-lysine or other coatings to improve cell attachment. Enhances cell attachment in conditions such as reduced-serum or serum-free medium, resulting in higher yields. Stable at room...

These Cell Culture Flasks have 175 cm2 available growth area and are manufactured from optically clear virgin polystyrene. Treated for optimal cell attachment and printed with lot numbers for ease in traceability. 100% integrity tested. Sterilized by...

These Cell Culture Flasks have 175 cm2 available growth area and are manufactured from optically clear virgin polystyrene. Treated for optimal cell attachment (Cat. No. 978-28588 is not treated). Printed with lot numbers for ease in traceability...

• 25cm available growth area• Manufactured from optically clear virgin polystyrene• Printed with lot numbers for ease in traceability• 100% integrity tested• Sterilized by gamma irradiation and certified...

Manufactured from optically clear virgin polystyrene with 75 cm2 available growth area. Tissue culture surface treatment for optimal cell attachment. Each flask is printed with lot numbers for ease in traceability. 100% integrity tested. Sterilized...

Cornings enhanced T-75 Flask features a U-shaped design, which improves usability while maintaining the same environment for cell growth as previous designs. The U-shaped T-75 flask includes design advances, such as rounded shoulders, which allow for an...

1720 cm2 available growth area on polystyrene gas permeable surface. Treated for optimal cell attachment and gamma sterilized. Bar coded and compatible for use on Cell Culture Automation Platforms. Plug seal cap on a straight neck designed for filling...

The HYPERFlask M vessel is specifically designed for manual use. Originally, the HYPERFlask cell culture vessel was developed for automation. Due to its popularity for use on the bench top, Corning has redesigned the HYPERFlask M vessel with new features...

The Corning Synthemax II-SC Substrate is an easy-to-use, self-coating material for creating a unique synthetic surface that mimics the natural cell environment. This surface supports the adhesion and expansion of stem cells in their undifferentiated...

• 100 cm available growth area• Manufactured from optically clear virgin polystyrene• 100% integrity tested.• Sterilized by gamma irradiation and certified nonpyrogenic• Cat. No. 758-10013 is treated with a...

• 162 cm2 available growth area• Manufactured from optically clear virgin polystyrene• Treated for optimal cell attachment• Printed with lot numbers for ease in traceability• 100% integrity tested• Sterilized by...

Corning® 225 cm2 Traditional Cell Culture Flasks with Angle Necks• 225 cm2 available growth area• Manufactured from optically clear virgin polystyrene• Printed with lot numbers for ease in traceability• 100% integrity...

Corning® 25 cm2 Triangular Cell Culture Flasks with Angled Necks• 25 cm2 available growth area• Manufactured from optically clear virgin polystyrene• Treated for optimal cell attachment• Printed with lot numbers for ease in...

Delong style, with three baffle indents designed to provide greater agitation of solutions to improve oxygen or gas transfer when used with rotary or reciprocating shakers. Long neck reduces splashing and is designed for two-position polypropylene...

Flasks are used for converting homogenous tissue samples into cell suspensions by digestion of connective proteins. Phenolic screw cap with rubber liner on neck and sidearm. Designed with well below sidearm to prevent unseparated tissues from being...

Flasks are used for converting homogenous tissue samples into cell suspensions by digestion of connective proteins. Heavy beaded neck accepts cotton plugs. Four extra-deep baffles enhance vigorous agitation.Image(s) are representative of the product...

Narrow-mouth flask designed for culturing organisms requiring a large surface area to volume ratio. The neck O.D. is 38 mm. use this flask on a heat source smaller than the base of the flask. Uneven heating of the flask could cause breakage.Image(s) are...

2.8 L wide-mouth flask is designed for culturing organisms requiring a large surface area to volume ratio. It can also be used in serum production. Note: Do not use this flask on a heat source smaller than the base of the flask. Uneven heating of the...

The long neck culture flask is basically an Erlenmeyer flask to which a long straight, rimless neck of heavy tubing has been added. The longer necks reduce the amount of splashed solution reaching the closure. It is ideal for shaker cultures.Image(s) are...

Delong style neck, with three extra-deep baffles, to enhance gas transfer when used with rotary or reciprocating shakers. Long neck reduces splashing and is designed for two-position polypropylene closures. Closures are sold separately.Image(s) are...

Designed for use with rotary and reciprocating shakers where baffle indents provide greater turbulance to improve oxygen transfer rates or aeration. Flask has a neck with a plain fire-polished finish and suitable for a plastic cap.Image(s) are...

Screw-thread finish. Supplied with white rubber lined closure (not attached). Designed from ASTM Specification E1404, Type III requirements.Image(s) are representative of the product group and not necessarily the individual product.Capacity (mL): 50GPI...

Kimax flask has a thick-walled tubing neck with a plain fire polished finish, sealed to an Erlenmeyer-shaped body. Neck is long enough to accept a metal or plastic cap, or a cotton plug may be used if desired. All flasks have durable white ceramic enamel...

Protect your valuable cell culture samples. These caps for Thermo Scientific™ Nunclon™ Delta Flasks are offered in two styles-vent/close (solid) and filter-to meet your application needs. Sterilized by gamma irradiation and certified to be...

Enhance cell attachment, growth and differentiation with Thermo Scientific™ Nunc™ Cell Culture Treated EasYFlasks™. These polystyrene flasks receive the proprietary Nunclon™ Delta surface treatment to maximize adhesion for a broad...

• Tissue culture treated flasks with vent caps• Uniform hydrophilic surface is ideal for consistent cell attachment• Vent caps feature 0.22 m hydrophobic membrane• Canted neck design for easy access • Packaged sterile (gamma...

2.8 L polycarbonate flask provides the wide surface area desirable for culturing microorganisms in liquid media, increasing aeration for better growth. Break-resistant, transparent polycarbonate has excellent mechanical strength. For a leakproof seal,...

Break-resistant flasks provide an alternative to glass flasks and produce equivalent growth curves with E. coli and S. cerevisiae. Baffles increase mixing. Polycarbonate has excellent mechanical strength. 500 and 1000 ml sizes feature a straight neck...

• Sterile, non-pyrogenic cell culture flasks are precoated with either Poly-D-Lysine or Collagen I • Consistent surface promotes cell attachment, growth and differentiation • Stable at room temperature, no refrigeration necessary...

Ideal for:- Karyotyping of cells- Single cell autoradiography- Single cell immuno-fluorescenceCell culture directly on a microscopy slideThe SlideFlask is ultrasonically welded and individually leak tested.Image(s) are representative of the product group...

• For cells not needing Nunclon treated surface • For easy identification the flasks have a white cap • Extra caps in every carton • Non pyrogenicImage(s) are representative of the product group and not necessarily the individual...

• Barcode type: Code 128 numerical 10 digits for Prefix: NU • Molded volume graduations offer excellent guidance during filling • Nunclon certified • Fit TAPs SelecT Automated Cell Culture SystemImage(s) are representative of the...

• Cell culture flasks with surface areas from 25 - 500 cm • Filter caps or vent/closed caps available for good gas exchange • Extra caps included in every carton • Short, wide neck for easy access • Individually leak tested...

The Nunclon treated TripleFlask provides 500 cm2 of growth area within the dimensions of a T-175 cm2 standard flask. Three parallel surfaces are sonically welded to support conventional flat, monolayer culturing. After filling, the media equilibrates in...

Thermo Scientific™ Nunclon™ Sphera™ Flasks feature a superior cell culture surface with demonstrated performance that elevates stem cell and cell culture research.Image(s) are representative of the product group and not necessarily the...

Unique peel-off cover allows easy access to growth surface. Offers excellent optical clarity for microscopic examination. Constructed from high-grade, low-toxin polystyrene. Screw cap constructed from polyethylene with 0.2 µm hydrophobic membrane...