SAMPLERS

Heavy duty scoops with many industrial and laboratory applications. Suitable for liquids and powders.Image(s) are representative of the product group and not necessarily the individual product.Capacity (mL): 15Handle Length (in.): 13/4Bowl Length (in.):...

Manufactured from chemically resistant high density polyethylene, this sampling device is perfect for corrosive environments and for hard to reach places. The included bottle (Cat. No. 961-17129) screws into the end of the handle and is filled via four 5...

Fabricated, HDPE scoops with many industrial applications. Large medium weight polyethylene scoops are available in 1/2 gallon and 1 gallon capacities.• Cat. No. 141-12131: Large, approximately 1 gallon capacity. Bowl size is 8 in. diameter x 91/2...

Fabricated in the USA of high density polyethylene, these plastic ladle dippers feature a high-temperature extra heavy duty bowl with securely welded solid handle. Handy for sampling and dispensing corrosive liquids. 600 mL size (Cat. No. 141-12185) is...

Uni-Core is a disposable punch and is manufactured from plastic. Each stainless steel tip provides up to 500 punches and is ideal for laboratories with low sample volumes.The Harris Punches were developed to be used with paper fiber to remove a disk from...

The H-1240D penetrometer adds a digital gauge to the H-1240 electric penetrometer (Cat. No. 341-86650) to provide precise at-a-glance readings, as well as the ability to automatically start a test with a button push and have the test end after a preset...

Takes the H-1200 universal penetrometer (Cat. No. 341-86647) and adds an automatic digital timer to it. The timers release mechanism is switchable between seconds minutes, or hours. Timer may be set in 1/10th second intervals. Plunger releases with push...

Joint sealant for asphalt & concrete pavements; ASTM D5329, Resilience ball penetration tool. Total weight: 27.5 g. The Joint Sealant for Asphalt & Concrete Pavements ASTM D5329 supports the following standards: ASTM D5329.Image(s) are representative of...

Penetration Needle for Food, Paste, and Paints; U.S. Dept. of Agriculture. Hollow 90° aluminum cone and tip. Weight: 35 gImage(s) are representative of the product group and not necessarily the individual product.

Grease-testing penetrometers; ASTM D217, D937 ASA Std. Z11.3;• H-2520 (Cat. No. 621-10206): Hollow 90° brass cone. Removable nut and stem. Weight: 102.5 g.• H-2522 (Cat. No. 621-10209): Hollow 90° stainless steel cone, highly polished...

Hollow 90° magnesium cone and plunger. Total cone weight: 30.0 g. Supports the following standards: ASTM D2884Image(s) are representative of the product group and not necessarily the individual product.

Hardened stainless steel tip with special plunger. Image(s) are representative of the product group and not necessarily the individual product.

Measuring firmness of solid and plasticized fats: shortenings, butter, margarine. AOCS Cc 16-60, 20 aluminum cone, 3.2 mm ferrule, 0.8 mm stainless steel blunt tip. Overall length 106 mm. Weight: 45 g.Image(s) are representative of the product group and...

Recovery of used grease / small obtainable samples; ASTM D1403, 1/4 scale. (Not considered a substitute for full-size cone specified in ASTM D217.) Weight: 9.38 g. The Penetration Needle, Recovery of Used Grease, Small Samples, ASTM D1403 supports the...

Bituminous materials; ASTM D5; AASHTO T49, IP49; ASA Std., A37.1; Fed Spec. SS.R. 406C, Meth. 214.01, Standard hardened stainless steel needle. H-1280 (Cat. No. 621-10119) and H-1300 (Cat. No. 621-10125) feature 40 to 45 mm exposed needle lengths; H-1290...

Waxes with 250 or less penetration; ASTM D1321; Hardened stainless steel wax penetration needles with tapered point, blunt tip of truncated cone. Ferrule is approx. 3.2 mm diameter. Weight: 2.5 g. The Penetration Needles, Waxes supports the following...

Lighter and smaller than H-1200 (Cat. No. 341-86647) for field work, units micrometer adjusts for accurate settings, as well as coarse adjustment for approximate settings. Only one additional 50 g loading weight is included with a H-1280 needle (Cat. No...

Stainless steel replacement tip, nut and stem ONLY. For applications requiring 90° cones. ASTM D217, D937 ASA Std. Z11.3.Image(s) are representative of the product group and not necessarily the individual product.

Direct-reading instrument for precision penetration measurements of bituminous materials, cement, petrolatum and waxes, as well as food, cosmetics and pharmaceutical products. Unit has 5 in. diameter indicator dial, graduated in 400 divisions of 0.1 mm,...

Humboldt Mfg. Aluminum ScoopsImage(s) are representative of the product group and not necessarily the individual product.

Enclosed Sample Splitters are ideal for dusty samples, includingcoal, coke and chaff. Humboldt splitters are constructed of cold-rolled steel, or in some cases, stainless steel. All splitters include pans, scoop and cleaning brush. Meet ASTM C702, D410,...

Riffle-type sample splitters divide or halve dry materials such as cement, gravel, powdered ores, coal, coke, sand, soils, etc. For rapid, single-step reduction of large sample volumes - ideal forfield applications. Material poured into the hopper is...

Riffle-type sample splitters divide or halve dry materials such as cement, gravel, powdered ores, coal, coke, sand, soils, etc. Material poured into the hopper is divided into two equal portions by a series of chutes that discharge the material...

Stainless Steel ScoopsImage(s) are representative of the product group and not necessarily the individual product.

High-density polyethylene dippers with PVC grip handle for removing samples from large tanks. Lightweight but durable. 12 ft handle (two piece) has a wood core. Two pour spouts and graduations.Image(s) are representative of the product group and not...

Ideal for sewage treatment plants, chemical plants, food processing facilities-anywhere that accurate sample levels of settled solids in noncaustic materials are needed. The unit holds approximately 3 oz per foot. Top section includes nylon rope for...

Suitable for use with most liquids. Quality material and fine workmanship make these dippers long lasting and economical. 60 ml (2 oz) size is made of one-piece construction. NSF-approved for use in the food industry.Image(s) are representative of the...

Where sterile techniques are required for collection of samples, sterilzed spoons and sporks are ideal for use with Whirl-Pak bags. These easy-to-use spoons and sporks are made of durable plastic. The procedure for contamination-free use is to open the...

Use for ultra-pure applications and with aggressive media. Handle hooks over edge of container, eliminating dripping of corrosive fluids onto surfaces. The 6.4 cm (21/2 in.) diameter allows for use with containers having at least a 7.6 cm (3) opening and...

Bellows samplers provide quick and easy liquid sampling with one hand operation.• FDA grade polyethylene sampler tube• Long tapered top with a 4 mm openingImage(s) are representative of the product group and not necessarily the individual...

These scoops are rigid, strong, and smooth. A flat bottom keeps them upright when filled or empty, allowing them to be used as weighing boats or to be placed on a flat surface. The 60 and 125 mL scoop have a longer handle that increase the distance...

Perfect size and shape for taking samples, especially from wide mouth containers. Designed to hold various capacities. One piece scoops made of high impact polystyrene are individually sealed an sterilized in a polyethylene bag. 2 and 4 oz sampling...

Heavy-duty scoops have a seamless body and a strong, tubular handle for easy handling and cleaning. Made from 304 stainless steel.• Easy to clean • SterilizableImage(s) are representative of the product group and not necessarily the...

One-piece molded scoops with extra-long handles have the perfect shape for rapid sampling. Rounded contours prevent material retention.Image(s) are representative of the product group and not necessarily the individual product.Length (in.): 7Capacity oz...

Thermo Scientific 5G Terra Core Soil Sampler is a cost effective, time saving, disposable transfer tool for soil sampling as described in USEPA SW-846 Method 5035.The Terra Core soil sampler delivers an approximate 5 g sample quickly and conveniently...

Laboratory Scoops are made from high quality stainless steel and available in two sizes 5 oz and 52 oz.Image(s) are representative of the product group and not necessarily the individual product.Capacity (oz): 5Capacity (oz): 52

These units are constructed of corrosion-resistant Type 302 stainless steel. A weighted plunger with a Viton O ring seals the reservoir chamber at the bottom. A negligible amount of liquid will enter during descent. Unit is not supplied with cable. We...

Uniquely-designed top spin bar and bottom valve plate mechanism provides a positive seal for sample retention along with greater control for releasing the sample. Modular design has added flexibility by allowing the connection of several sections to form...

The E-Z Sampler is an efficient and time saving method of sampling unknowns from drums and tanks. Constructed of chemically resistant polypropylene, the E-Z Sampler is supplied with a 39-inch head/shaft assembly and a 125 mL borosilicate glass bottle...

Glass Coliwasa Samplers are used to collect composite liquid samples from top to bottom in drums, tanks, and reservoirs. After a samples has been collected, lower and press lightly on the inner tube, which positively seats the PTFE seal, locking the...