TLC

Analtech offers improved saturation pads made from a textured paper. This provides greater surface to assist in rapid vapor saturation of a TLC chamber air space. The majority of TLC separations are performed under saturated conditions in large chambers...

Analtech offers silica gel in two pore sizes and particle size ranges. These materials meet the same high quality and high chemical purity levels as specified for all of the Analtech High Performance Silica Gel.Image(s) are representative of the product...

High Performance UNIPLATES provide high resolution separations in less than five minutes with migration distances as little as 5 to 7 cm. These plates are prepared with high efficiency silica gel having an 8 micron average particle diameter and narrow...

High Performance UNIPLATES provide high resolution separations in less than five minutes with migration distances as little as 5 to 7 cm. These plates are prepared with high efficiency silica gel having an 8 micron average particle diameter and narrow...

These silver nitrate impregnated silica gel plates are for argentation chromatography. They are impregnated with silver nitrate between 5% and 20%, which modifies the separation characteristics of the adsorbent layer to permit increased...

These silver nitrate impregnated silica gel plates are for argentation chromatography. They are impregnated with silver nitrate between 5% and 20%, which modifies the separation characteristics of the adsorbent layer to permit increased...

Silica gel and bonded phases are based upon a 150A pore silica gel, 35 to 75 µm particle. Pore size 150 A.Image(s) are representative of the product group and not necessarily the individual product.

SpotOn - a semi-automated device used to apply samples on Thin Layer Chromatography plates. The instrument eliminates the need for manual sample application and can be used to apply up to 18 samples at a time. With digital temperature and speed controls,...

Scored Kit: This 16 slot syringe cradle easily swaps with the standard cradle. Slots were designed to align 16 syringes to any of our 10x20cm scored TLC plates. Channeled Kit: This 19 slot syringe cradle easily swaps with the standard cradle. Slots were...

Spotting Bulb Assembly for use with glass micropipettes.Image(s) are representative of the product group and not necessarily the individual product.

These tanks are designed for the development of 10x10cm or smaller TLC plates. The smaller size of the chambers significantly reduces the amount of solvent needed for development. The single molded tank design includes flat ground tops, beveled for...

This transformer is for using the CycloGraph™ model I (Spectrum Cat. No. 476-11875 and 476-11878) in areas of the world that use 230 volt power. The CycloGraph™ can be used with either 50 or 60 hertz power, so only the voltage must be brought...

These tanks are designed for the development of 10x10cm or smaller TLC plates. The smaller size of the chambers significantly reduces the amount of solvent needed for development. The single molded tank design includes flat ground tops, beveled for...

These tanks are designed for the development of 10x10cm or smaller TLC plates. The smaller size of the chambers significantly reduces the amount of solvent needed for development. The single molded tank design includes flat ground tops, beveled for...

Scraping adsorbent layers is greatly improved with this steel flat-blade scraper. Blade is 13 mm wide and tapered to a sharp edge for rapid removal of adsorbent from plate. Handle is aluminum. A general purpose tool for the laboratory. Image(s) are...

Analtechs glass TLC developing chambers provide optimum developing conditions for a variety of TLC plate sizes and shapes. Precision ground surfaces provide tight seals between tanks and glass covers and permit complete saturation of chambers with...

Stainless steel rack holds TLC plate in proper position for spraying with visualization reagents. Self-draining, no solvent feedback. Works well in combination with Analtechs Disposable Spray Booth (Spectrum Cat. No. 476-12496) Image(s) are...

This sturdy stainless steel rack safely holds ten 20 x 20 cm TLC UNIPLATES (or a number of smaller plates at least 20 cm wide) for drying or storage. A backstop on each set of slides prevents plates from falling out the rear and permits vertical mounting...

Transparent Spotting Guide may be used with plates up to 20 x 20 cm. The guide rests above the surface of the plate without contacting the adsorbent layer, avoiding damage to the layer. It accurately positions micropipettes and syringes, even when the...

This is a refillable sprayer powered by its own self-contained replaceable pressure unit. It can be used with all common TLC reagents and delivers up to 16 ozs of reagent from each pressure unit. Aspirating tube is made of polypropylene and the...

These transilluminators are high performance units specially designed for fluorescence analysis, including TLC plates and electrophoresis gels. They are also well suited for DNA related research. The available transilluminators are compatible with...

High Performance UNIPLATES provide high resolution separations in less than five minutes with migration distances as little as 5 to 7 cm. These plates are prepared with high efficiency silica gel having an 8 micron average particle diameter and narrow...

This compact, lightweight UV cabinet will accommodate TLC plates up to 20x20 cm and any of our 4 watt or 6 watt UV lamps. Access to the interior of the cabinet is via a flexible, dark curtain on the front of the cabinet. The contoured viewing port...

Replacement UV TubesImage(s) are representative of the product group and not necessarily the individual product.Watts: 4Wavelength (nm): 254Watts: 4Wavelength (nm): 366Watts: 6Wavelength (nm): 254Watts: 6Wavelength (nm): 366Watts: 8Wavelength (nm):...

The Analtech Vapor Phase Fluorescence Chamber is a new advance in the fields of qualitative and quantitative TLC. Difficult-to-detect compounds, such as sugars, can now be located at the nanogram level through chemically induced fluorescence. VPF is a...

Use white light transilluminators to view autoradiographs, x-ray films, microtiter plates on the white light transmitting glass surface. Key Features: Two white light models are available with work surface areas of 21 x 26cm or 36 x 43cm. Plexiglass and...

25W White Light Bulb for 93-80 (Spectrum Cat. No. 476-11986) or Cool-White Lamp Replacement Tube.Image(s) are representative of the product group and not necessarily the individual product.

Ground to the close tolerances needed for tight cover fit. Jar edges are ground flat within 0.25 mm. Covers are not supplied. Do not use with heat, pressure or vacuum applications.Image(s) are representative of the product group and not necessarily the...

PLC plates are for applications involving higher sample quantities. They are based on the same proven EMD Millipore silica-binder technology as analytical TLC plates, however they allow loads of up to gram amounts. Samples are typically applied as a band...

EMD Millipore TLC aluminum oxide plates are designed to optimally complement the pH value of your compounds. This provides you with distinct separation advantages: under aqueous conditions, basic compounds can be best separated on basic aluminum oxide...

Cellulose HPTLC plates for the analysis of polar substances. An organic sorbent, cellulose is perfect for separating hydrophilic substances by partition chromatography. HPTLC cellulose layers utilize a high-purity, rod-shaped microcrystalline cellulose,...

Cellulose TLC plates for the analysis of polar substances. An organic sorbent, cellulose is perfect for separating hydrophilic substances by partition chromatography. TLC cellulose layers are based on microcrystalline cellulose for standard separations...

When separation challenges cannot be adequately resolved with standard silica, you can count on our modified silica plates to facilitate your application. The system offers a free choice of solvents, so you can be sure that they meet your particular...

Manual sample application need not be labor intensive or time consuming. EMD Millipores concentrating zone plates are made to make your daily work easy. They are based on different adsorption properties of two silica adsorbents: an inert large pore...

HPTLC LiChrospher® plates are thin layer chromatography plates based on spherical silica particles. Compared to standard HPTLC, these unique plates offer the ultimate in performance and speed, enabling high-throughput analyses of complex samples...

EMD Millipore HPTLC plates use an optimized silica 60 sorbent with a significantly smaller particle size: just 5 - 6 m compared to 10 - 12 m used for classical TLC. This enables a higher packing density and hence a smoother surface. Band diffusion is...

EMD Millipore HPTLC plates use an optimized silica 60 sorbent with a significantly smaller particle size: just 5 - 6 m compared to 10 - 12 m used for classical TLC. This enables a higher packing density and hence a smoother surface. Band diffusion is...

EMD Millipore HPTLC plates use an optimized silica 60 sorbent with a significantly smaller particle size: just 5 - 6 m compared to 10 - 12 m used for classical TLC. This enables a higher packing density and hence a smoother surface. Band diffusion is...

EMD Millipore HPTLC plates use an optimized silica 60 sorbent with a significantly smaller particle size: just 5 - 6 m compared to 10 - 12 m used for classical TLC. This enables a higher packing density and hence a smoother surface. Band diffusion is...

EMD Millipore HPTLC plates use an optimized silica 60 sorbent with a significantly smaller particle size: just 5 - 6 m compared to 10 - 12 m used for classical TLC. This enables a higher packing density and hence a smoother surface. Band diffusion is...