ROTARY EVAPORATORS

These traps are used as parts for rotary evaporators. A trap is used when foaming is likely to occur and be drawn into the condenser on the rotary evaporator. They consist of a body with upper and lower stems. The lower stem extends upward into the body...

Glass Lid for use on CentriVap when applications involve acids or solvents which attack acrylicImage(s) are representative of the product group and not necessarily the individual product.

To regulate the water flow. The integrated magnetic valve/opens the water circuit during automatic distillation. The integrated fine adjustment allows user to reduce the flow of the cooling water, optimizing water consumption. Accessory recommended for...

Diagonal glassware sets for IKA RV10 Rotary Evaporators.Image(s) are representative of the product group and not necessarily the individual product.Accessories

Distilling spiders with flasks for IKA RV10 Rotary Evaporators.Image(s) are representative of the product group and not necessarily the individual product.Accessories

Distilling spiders for IKA RV10 Rotary Evaporators.Image(s) are representative of the product group and not necessarily the individual product.Accessories

Dry ice condenser for distilling low-boiling solvents. The solvent to be distilled can be continuously fed in through the PTFE inlet tube. Cooling by dry ice, no cooling water required. Max. condensation thanks to low temperatures.Catalog No. 330-98773:...

Evaporating cylinders for IKA RV10 Rotary Evaporators.Image(s) are representative of the product group and not necessarily the individual product.Accessories

Evaporation flasks for IKA RV10 Rotary Evaporator Image(s) are representative of the product group and not necessarily the individual product.Accessories

Accessories required when using the RV 10.500 Foam inhibitor with 3 l evaporating flask. Allows the heating bath to be moved 150 mm horizontally. Image(s) are representative of the product group and not necessarily the individual product.Accessories

RV 10.2025 Foam brake (NS 24/40) for IKA RV10 Rotary Evaporators.Image(s) are representative of the product group and not necessarily the individual product.Accessories

Industrial vacuum source for many different in-house users; usually fixed pipes.Image(s) are representative of the product group and not necessarily the individual product.Accessories

For single or multiple connection bench top diaphragm vacuum pump. High quality vacuum valve for an optimum controlled operation. The integrated check valve eliminates external influence on the operating pressure in the vacuum chamber. Included with each...

Powder flasks for IKA RV10 Rotary Evaporators.Image(s) are representative of the product group and not necessarily the individual product.Accessories

For adjusting the cooling water pressure when operating at the water pipe.Image(s) are representative of the product group and not necessarily the individual product.Accessories

Essential accessory if it is not possible to work in an extractor hood. Protects the user against splashes of hot liquid and in the event of the evaporator flask breaking.Image(s) are representative of the product group and not necessarily the individual...

Airtight lip-seal from a PTFE compound with a built-in stainless steel spring. Image(s) are representative of the product group and not necessarily the individual product.

One rotary evaporator at one pump/tabletop operation. The pump only works when vacuum is needed - leading to a savings of up to 90% of operating time, increased equipment life and reduction of noise. Integrated LED display. Power magnetic valve: 24...

Receiving flasks for IKA RV10 Rotary Evaporators.Image(s) are representative of the product group and not necessarily the individual product.Accessories

Ergonomic, compact design with innovative functions to improve operating results. Rotary evaporators with integrated heating bath HB 10 digital including space saving vertical glassware (1 L).- Heating bath with adjustable safety circuit, stand alone...

These rotary evaporators were designed and engineered for ease of use, while maintaining the highest level of safety. Motorized lift is standard, making for easier removal of the evaporating flask from the hot water/oil bath. The motorized lift...

The IKA Rotary Evaporator range gets a new family member - the RV 8. This new distilling system completes the existing series by adding a functional basic model. The manual lift, with ambidextrous design, allows for precise positioning of the glassware...

The IKA RV 8 Rotary Evaporator is a functional basic model. The manual lift, with ambidextrous design, allows for precise positioning of the glassware (not included). Digital displays for rotation speed and heating bath temperature allow for optimal...

The RV 8 Rotary Evaporator distilling system completes the existing series by adding a functional basic model. The manual lift, with ambidextrous design, allows for precise positioning of the glassware. Digital displays for rotation speed and heating...

For optimal protection against splashes of hot liquid. Image(s) are representative of the product group and not necessarily the individual product.Accessories

RV 10.73 Vapor tube (NS 24/40) for IKA RV10 Rotary Evaporator.Image(s) are representative of the product group and not necessarily the individual product.Accessories

Vertical glassware sets for IKA RV10 Rotary Evaporators.Image(s) are representative of the product group and not necessarily the individual product.Accessories

Vertical condenser with distributor and stop valve for reflux distillation. The solvent to be distilled can be continuously fed in through the PTFE inlet tube.Vertical intensive condenser with distributor and stop valve for reflux distillation. The...

Vertical intensive condenser with double jacket and distributor for particularly efficient condensation. The solvent to be distilled can be continuously fed in at the distributor using the PTFE inlet tube. Catalog No. 330-98767: Condenser and receiving...

To prevent contamination of the water pipes. With removable filter for easy cleaning. Image(s) are representative of the product group and not necessarily the individual product.Accessories

Trap has a coarse fritted disc sealed between the lower inner and top outer joint to prevent contents of the flask from entering into the condenser in the event of bumping. All traps have a 24/40 top outer joint and the listed size of the lower inner...

Design provides for expanded volume for organic mixtures that have a tendency to foam excessively. Inner vapor tube is ring-sealed at the top of the flask to prevent entry into the condenser. Use inner vapor tube at bottom where foaming is likely to...

PTFE-Coated Aluminum Rotor for CentriVap micro IR. Image(s) are representative of the product group and not necessarily the individual product.No. of Places: 8Tube Size (mL): 30Tube Size Dia. x H (mm): 20 x 73No. of Places: 12Tube Size (mL): 15Tube Size...

Rotors for CentriVap ConcentratorsSpecifications• Chemical Resistance: Standard• Material: Anodized AluminumImage(s) are representative of the product group and not necessarily the individual product.

Rotors for CentriVap ConcentratorsSpecifications• Chemical Resistance: Standard• Material: Anodized AluminumImage(s) are representative of the product group and not necessarily the individual product.

Aluminum block holds 50 x 15 mL (17 x 20 mm) conical tubes. For use with RapidVap Vertex Dry Evaporators. Because the block is angled in the Vertex, the sample capacity is 12 mL. All RapidVap Vertex Dry Block Evaporators require a Block (not included)...

170 mL Flat Bottom Tubes for use with RapidVap N2 Evaporation System and RapidVap Vacuum Evaporation System.Image(s) are representative of the product group and not necessarily the individual product.

Labconco 170 mL Tubes with Stems for RapidVap N2 Dry Evaporation Systems Image(s) are representative of the product group and not necessarily the individual product.

Labconco 28 mm Rotor for CentriVap Evaporators• Chemical Resistance: Standard• Material: Anodized AluminumImage(s) are representative of the product group and not necessarily the individual product.

Six-place Microtiter Plate Rotor. Holds 6 standard microtiter plates or 3 deep well microtiter plates. Composed of either anodized aluminum or PTFE coated.Image(s) are representative of the product group and not necessarily the individual product...